跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#5

Marty Rippens编辑

编辑已通过 由 Marty Rippens

之前
之后
不变

步骤行

[* blackred] Using the Phillips Heads #00 screwdriver, unscrew the two 4.9 mm screws depicted here.
[* blackred] Using the Phillips Heads #00 screwdriver, unscrew the two 4.9 mm screws depicted here.
[* black] Next, remove the metal cover to expose the bluetooth card.
[* black] Gently fit the flat end of a spudger under the edge of the bluetooth card. Then, lightly pry up on this edge to release the card from the motherboard. (Refer to the third image)