跳转到主内容

跳到步骤#2

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

-[* black] With one hand, push the keyboard ribbon cable in slightly to access the ZIF connector beneath it.
-[* black] Use a spudger tip to flip up the retaining flap.
-[* black] Gently slide the cable out of the connector.
+[* black] With one hand, lift the keyboard ribbon cable up and push it slightly away from the trackpad to access the ZIF connector underneath.
+[* black] Use a spudger tip to pry up the retaining flap on the keyboard ribbon cable ZIF connector.
+[* icon_caution] Be careful to pry on the hinged flap, not the connector itself; the connector is delicate and may break.
+[* black] Gently slide the keyboard ribbon cable out of the ZIF connector.