跳转到主内容

跳到步骤#1

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

-[* black] Use the point of a spudger to lift the ZIF connector retaining flap on the trackpad data cable.
-[* black] Gently slide the ribbon cable out of the ZIF connector.
+[* black] Use the tip of a spudger to pry up the retaining flap on the trackpad data cable ZIF connector.
+[* icon_caution] Be careful to pry on the hinged flap, not the connector itself; the connector is delicate and may break.
+[* black] Gently slide the trackpad ribbon cable out of the ZIF connector.