跳转到主内容

跳到步骤#2

Ericka Mendoza编辑

编辑已通过 由 Ericka Mendoza

之前
之后
不变

步骤行

-[* red] Remove two 3mm screws using the Phillips #00 screwdriver from the hard drive.
-[* black] Pry the hard drive up and out using the spudger.
+[* red] Remove the back cover by using the black spudger to lift up on the edges of the cover.
+[* black] Using a suction cup to assist in lifting the back cover.