跳转到主内容

跳到步骤#1

Ericka Mendoza编辑

编辑已通过 由 Ericka Mendoza

之前
之后
不变

步骤行

-[* black] Using the spudger, disconnect the white ribbon cable from the motherboard by prying up the latch up.
+[* black] On the back panel of the device, remove the four (4) M2.5xL6 screws at the top of the photo Phillips #0 screwdriver.
+[* black] Unscrew the three (3) screws at the bottom of the photo using a T5 Torx screwdriver.