跳转到主内容

跳到步骤#4

Kyle Smith编辑

编辑已通过 由 Kyle Smith

之前
之后
不变

步骤行

-[* black] Using a pair of tweezers disconnect the vibrating motors connector near the bottom of the device. Caution: these wires are very delicate! Also note that while it may not look the same, this connector also lifts ***up***, similar to the camera and battery connectors, and does not slide out.
-[* black] Alternatively, you can also leave the connector plugged in and simply remove the vibration motor from the frame and keep it together with the motherboard as you remove it, being careful to not dangle it from the small wires.
+[* black] Using a pair of tweezers disconnect the vibrating motors connector near the bottom of the device.
+ [* icon_caution] Caution: these wires are very delicate!
+ [* icon_note] Also note that while it may not look the same, this connector also lifts ***up***, similar to the camera and battery connectors, and does not slide out.
+[* icon_note] Alternatively, you can also leave the connector plugged in and simply remove the vibration motor from the frame and keep it together with the motherboard as you remove it, being careful to not dangle it from the small wires.