跳转到主内容

跳到步骤#3

Adam O'Camb编辑

编辑已通过 由 Adam O'Camb

之前
之后
不变

步骤行

-[* black] Use the plastic opening tool to lift up and remove the daughterboard.
-[* icon_note] The daughterboard may feel sticky and make a cracking noise.
-[* black] Use your hands to completely remove the daughterboard.
+[* black] Use a plastic opening tool to pry up the charging assembly.
+[* icon_note] The assembly is glued down, so pry slowly and carefully. Applying heat to back of the phone where the assembly is adhered can help soften the adhesive.
+[* icon_caution] Do not completely remove the charging assembly yet. It is still attached to the vibrator motor.