跳转到主内容

跳到步骤#5

Tarun Thiruma编辑

编辑已通过 由 Tarun Thiruma

之前
之后
不变

步骤行

-[* black] Once the screen assembly's right edge is separated, slide your tool around the bottom right corner of the device so it is underneath the bottom edge of the assembly.
+[* black] Once the screen assembly's right edge is separated, slide your pick around the bottom right corner of the device so it is underneath the bottom edge of the assembly.
[* black] Slide the tool all along the bottom edge of the phone to slice through the adhesive securing the screen assembly and release the plastic clips.
-[* black] Leave your tool here underneath the bottom edge of the screen assembly to prevent it from re-adhering to the frame. Continue to the next step with a new tool.
+ [* icon_note] These plastic clips should snap free much easier than the metal ones you released earlier.
+[* black] Leave your tool underneath the bottom edge of the screen assembly to prevent it from re-adhering to the frame. Continue to the next step with a new tool.