跳转到主内容

跳到步骤#2

Austin Blakely编辑

编辑已通过 由 Austin Blakely

之前
之后
不变

步骤行

[* black] Wedge the plastic opening tool between the gap created by separating the screen and body of the phone in the right hand corner to hold it open.
[* black] Insert the nylon spudger into the lower left corner of the screen and pry the screen toward you.
[* black] Continue to insert the plastic opening and spudger tools around the phone, and pry open the screen until it is fully separated from the device.
-[* icon_caution] Remove the screen gently and slowly as the screen may crack otherwise.
+[* icon_caution] It is possible to pry the display assembly apart at this step. Be sure to get the prying instruments underneath both the LCD and screen layers of the display assembly to ensure this separation does not occur.