跳到步骤＃2
由 Trenton Greevebiester — 编辑
编辑已通过 由 Trenton Greevebiester
- 之前
- 之后
- 不变
步骤行
| + | [* red] Using a Philips #1 screwdriver, unscrew the 2mm x 3mm screw, holding the WLAN card in place. |
|---|---|
| + | [* black] Using your hand disconnect the WLAN card by pulling it horizontally along the device. |
| + | [* black] After the WLAN card has been disconnected, make sure to dethread the wires connecting it so that they sit freely. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加