跳到步骤＃1
由 Eric Arnold — 编辑
编辑已通过 由 Eric Arnold
- 之前
- 之后
- 不变
步骤行
| [* red] Remove the two screws securing the logic board using your screwdrivers. |
| [* red] The black screw requires a T7 driver and the silver screw requires a T6 driver. |
| [* black] The logic board may be lifted free by its edge. |
| [* icon_note] The silver screw is accompanied by a washer that is easily lost. |
| [* icon_caution] Avoid disturbing the square of gray thermal paste centered on top of the power supply/heatsink during removal. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加