跳到步骤＃2
由 Marty Rippens — 编辑
编辑已通过 由 Marty Rippens
- 之前
- 之后
- 不变
步骤行
| - | [* red] Using the Phillips |
|---|---|
| + | [* red] Using the Phillips #0 screwdriver, remove the four 8mm screws holding down the hard drive. |
| [* orange] Take the spudger and prop up the connector so it is no longer attached. | |
| [* black] Use the spudger and prop up the hard drive and remove it. |