跳到步骤＃1
由 Adam Lourenco — 编辑
编辑已通过 由 Adam Lourenco
- 之前
- 之后
- 不变
步骤行
| + | [* black] Using a Philips P0 screw driver, unscrew the two 8mm screws from the panel. |
|---|---|
| + | [* black] Take a spudger and wedge it between the panel and the base of the device. |
| + | [* black] Push down on the spudger until you hear a click that the panel has detached from the base. |
| + | [* black] Slide the spudger along the panel and continue to push down until the panel is completely detached. |
| + | [* black] Remove the panel |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加