跳转到主内容

跳到步骤#5

johnsawyercjs编辑

等待批准

已删除
已添加
不变

步骤行

[* red] Remove the single 28 mm T10 Torx screw securing the left speaker to the rear case.
[* black] Lift the left speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.
[* black] Lift the left speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.