跳转到主内容

跳到步骤#5

snickerz69编辑

编辑被拒绝 由 Walter Galan

已删除
已添加
不变

步骤行

[* red] Remove the single 28 mm T10 Torx screw securing the rightleft speaker to the rear case.
[* black] Lift the rightleft speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.
[* red] Remove the single 28 mm T10 Torx screw securing the rightleft speaker to the rear case.
[* black] Lift the rightleft speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.

图片1

没有之前的图片

已添加