跳转到主内容

跳到步骤#5

Greg Wilson编辑

编辑已通过 由 Greg Wilson

已删除
已添加
不变

步骤行

[* red] Remove the single 28 mm T10 Torx screw securing the leftright speaker to the rear case.
[* black] Lift the leftright speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.
[* red] Remove the single 28 mm T10 Torx screw securing the leftright speaker to the rear case.
[* black] Lift the leftright speaker up and out of the rear case. Don't try to slide the speaker out, since there is a plastic mounting pin under the top end of the speaker housing that holds it in place.

图片1

已删除

图片2

已删除