跳转到主内容

跳转至Black and Decker PS1800 Actuator Fwd/Rev Replacement简介

Taelar Tritton-Bowman编辑

编辑被拒绝 由 Kristen Gismondi

之前
之后
不变
Title
Black and Decker PS1800 Actuator Fwd/Rev Switch Replacement
Introduction
This will guide assists you throughin the process of removing/ and replacing the Actuator Fwd/RevForward and Reverse switch on the Black and Decker PS-1800. The button of the machine controls directionality.
Conclusion
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, simply place the case cover back on to the other half of the outer shell. Then place the screws in to the screw holes and finally tighten down screws with the Phillips head screwdriver.
Summary
This guide will showshows how to replace the Actuator Fwd/Rev on the Black and Decker PS-1800.