跳转到主内容

修复你的物品

维修的权力

商店

跳转至Hasbro Furby 2012 Switch Replacement简介

Jordan Castillo编辑

编辑已通过 由 Jordan Castillo

之前
之后
不变
设备
[ ]Hasbro furby 2012
Type
[ ]replacement
Thing
[ ]Switch
Title
[ ]Hasbro Furby 2012 Switch Replacement
Introduction
[ ]Replacing the switch requires the back panel to be removed. The hardest part of this guide is removing the clips holding the fur on the back panel in place.
Time Required Min
30分钟
Time Required Max
30分钟
Imageid
之前
之后
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Summary
[ ]Replace the switch within Furby's back panel.

指南的前提条件

工具

  • Flathead 3/32" or 2.5 mm Screwdriver x1 added.
  • J0 Phillips Head Screw Driver x1 added.
  • 1.0 mm Flathead Screwdriver x1 added.
  • Tweezers x1 added.

标志

  • In Progress added.
  • Student In Progress added.

步骤

Step #: 1
之前
之后
Step #: 2
之前
之后