跳转到主内容

跳转至Toshiba Satellite Pro A300 Disassembly简介

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变
设备
Toshiba Satellite Pro A300
Type
disassembly
Title
Toshiba Satellite Pro A300 Disassembly
Introduction
There are several variants of the A300 laptop so yours may not be identical in terms of the number and precise position of screws, but the principles will be very much the same.
You will need a small cross-head screwdriver and a prying tool (or a small flat screwdriver or a blunt knife).
In a dry atmosphere or if you find yourself picking up static from the carpet an antistatic wrist strap is highly recommended. At the very least you should frequently touch a radiator or water pipe or an earthed electrical appliance in order to discharge yourself.
Several different lengths of screws are used and it's important to put them back in the right place. You can use an egg box or a pill box and put screws of different lengths in different compartments, or to be really organised, stick the screws from each step to a piece of paper with Blu-tack and write the step number against each.
Time Required Min
没有估计
Time Required Max
没有估计
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Summary
This guide shows the complete disassembly of this laptop, allowing you to replace any of the main components.

标志

  • In Progress added.
  • Member-Contributed Guide added.

步骤

Step #: 1
之前
之后
Step #: 2
之前
之后
Step #: 3
之前
之后
Step #: 4
之前
之后
Step #: 5
之前
之后
Step #: 6
之前
之后
Step #: 7
之前
之后
Step #: 8
之前
之后
Step #: 9
之前
之后
Step #: 10
之前
之后