跳转到主内容

修复你的物品

维修的权力

商店

跳转至Holmes HEH8031 Fan Blade Assembly Replacement简介

Corinne Renguette编辑

编辑已通过 由 Corinne Renguette

之前
之后
不变
Introduction
BeUse this repair if you want to replace your fan blade assembly. Be sure to turn off the power and unplug the heater before beginning to change the fan assembly. assembly. The screws in this heater are recessed, so using a magnetic screwdriver will be helpful. Note: When reassembling the unit, you must replace the 2 machine screws that connect the rotor assembly to the housing before replacing the coarse-threaded screws. Aligning the machine screws may take some finesse.
BeUse this repair if you want to replace your fan blade assembly. Be sure to turn off the power and unplug the heater before beginning to change the fan assembly. assembly. The screws in this heater are recessed, so using a magnetic screwdriver will be helpful. Note: When reassembling the unit, you must replace the 2 machine screws that connect the rotor assembly to the housing before replacing the coarse-threaded screws. Aligning the machine screws may take some finesse.
Time Required Min
15分钟
Time Required Max
15分钟
Difficulty
Moderate
Easy

工具

  • Metal Spudger Set x1 added.
  • Phillips #1 Screwdriver x1 added.