跳转到主内容

跳转至Omaker M4 Back Case Replacement简介

[deleted]编辑

编辑已通过 由 [deleted]

之前
之后
不变
设备
Omaker M4
Type
replacement
Thing
Back Case
Title
Omaker M4 Back Case Replacement
Introduction
Removing the back case from the speaker is relatively easy. Once you unscrew the four back screws, the is a wire that is attached to the back case. Before pulling the back case completely off, disconnect the wire from the back case by carefully pulling it out. This will allow the back case to be completely removed from the device.
Time Required Min
没有估计
Time Required Max
没有估计
Imageid
之前
之后
Difficulty
Easy
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Summary
This guide will show how to remove the back cover from the Omaker M4. This guide also shows how to access the components inside the device.

工具

  • 1x Screwdriver Hex 1.3 Head x1 added.
  • PH000 drill bit x1 added.
  • Magnetic Pickup Tool x1 added.
  • Tweezers x1 added.

标志

  • In Progress added.
  • Student In Progress added.

步骤

Step #: 1
之前
之后
Step #: 2
之前
之后
Step #: 3
之前
之后
Step #: 4
之前
之后
Step #: 5
之前
之后