跳转到主内容

跳转至Canon PowerShot SD850 IS Battery Replacement简介

Anna Diehl编辑

编辑已通过 由 Anna Diehl

之前
之后
不变
Introduction
How to remove/install the battery of your Canon PowerShot SD850 IS.
The Canon PowerShot SD850 IS digital camera uses rechargeable batteries that you will occasionally have to remove. You can tell that your battery needs charging when the camera fails to turn on or displays a low battery indicator onscreen. Fortunately, you can easily get your camera running again. This guide explains how to remove or install the battery of your Canon PowerShot SD850 IS in two simple steps.
Conclusion
To reassemble your device, follow thesethe previous instructions in reverse order as follows:

# Slide and pull up the light grey tab to open the door
.
# Push the battery into the slot.
# Let go of the battery when the brown tab clicks into place.
# Push the door down with your finger until it clicks closed.