跳转到主内容

修复你的物品

维修的权力

商店

跳转至Nintendo DSi Battery Board/Fuse Replacement简介

bushing编辑

等待批准

之前
之后
不变
设备
[ … ]Nintendo DSi
Type
[ … ]repair
Thing
[ … ]Battery Board/Fuse
Title
[ … ]Repairing Nintendo DSi Battery Board/Fuse
Introduction
The battery contacts, power button and D-pad are on their own separate PCB inside the DSi; the PCB connects to the status LEDs using a ribbon cable and to the main board using a ribbon cable and power cable. [ … ] If you are replacing the bottom DSi case (e.g. to add an aftermarket translucent case), you will need to remove this board and put it in your new case. [ … ] If you blow the fuse (usually by plugging the battery in backwards), the orange charging LED will flash when plugged into A/C power, and the unit will refuse to power on; this guide will show you how to replace the board or even to repair the blown fuse on the board.
Time Required Min
30分钟
Time Required Max
30分钟
Imageid
之前
之后
Difficulty
Moderate
Conclusion
[ … ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Summary
[ … ]This guide will show you have to remove the DSi battery PCB, and if necessary, replace a blown fuse.

工具

  • Phillips #00 Screwdriver x1 added.
  • Precision Tweezer x1 added.
  • Prying device such as spudger or flat blade screwdriver x1 added.
  • Flathead 3/32" or 2.5 mm Screwdriver x1 added.

配件

  • Nintendo DSi Power Board x1 added.

标志

  • In Progress added.
  • Member-Contributed Guide added.

步骤

Step #: 1
之前
之后
Step #: 2
之前
之后
Step #: 3
之前
之后
Step #: 4
之前
之后