跳转到主内容

跳转至HP Photosmart D5160 printer Disassembly简介

Philip Le Riche编辑

编辑已通过 由 Philip Le Riche

之前
之后
不变
设备
HP Photosmart D5160 printer
Type
disassembly
Thing
Outer case and logic board
Title
HP Photosmart D5160 printer Disassembly
Introduction
The cover-open sensor is operated by a linkage which has a tendency to stick. Slamming the lid often works in mild cases but partial disassembly will give you access to the mechanism for cleaning and lubrication.
If the printer is completely dead or won't stay online there may be a fault on the main logic board, such as a failing or failed electrolytic capacitor in the power supply section. This can be replaced, though the very fine tracks on the logic board mean that care is required in unsoldering a failed art and fitting a replacement.
Time Required Min
没有估计
Time Required Max
没有估计
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Summary
This guide covers dissassembly in order to ease the cover-open linkage or to remove the main logic board for maintenance. Disassembly and maintenance of the print mechanism is not covered.

标志

  • In Progress added.
  • Member-Contributed Guide added.

步骤

Step #: 1
之前
之后