跳转到主内容

跳转至AXIS 213 PTZ Network Camera Capacitor Replacement简介

Stefan Van pellicom编辑

编辑已通过 由 Stefan Van pellicom

之前
之后
不变
Introduction
A lot of these camera's seem to come down with a '''"NO VIDEO" error''' in the upper left corner of the preview window. This is due to the failure of one or more capacitors on one of the video module's interface boards. Probably due to a combination of rather high temperature inside, and many years of use.
As it is hard to determine exactly which capacitor is involved, knowing any one of the others might fail next, and knowing the components come at 2 cents each, it is better to replace the lot ...
The soldering is not for the faintheatedfaint hearted, and requires much more than entry level experience !! You may want to prepare everything, and seek help for the final soldering step ...

工具

  • Phillips #0 Screwdriver x1 removed.
  • Tweezers x1 removed.
  • Flush Cutter x1 removed.