|
Introduction |
How to replace the screen of your Nokia 3300B.
[ … ]
1) Turn phone to back side. Pressing, button on back of phone, gently remove back piece.
[ … ]
2) Using tabs on back side (were behind back piece), release them from their usual spot.
[ … ]
3) Working way around side, left up front piece.("pops" off)
[ … ]
4) Gently pick up and remove keyboard.
[ … ]
5) Using _____ piece, remove screws (see picture) (six screws total) (circle on site)
[ … ]
6) Remove front plate interface from circuitry.
[ … ]
7) Using tweezers, remove metal plate from back. Connector pieces hidden behind shoulder pads.
[ … ]
8) Screen will tend to fall apart, so remove carefully. (keep screen part facing down).
[ … ]
9) Gently turn front piece over, screen will fall out (put hand behind front piece to catch screen)
[ … ]
10) Replace screen with new screen. Make sure oriented properly. (Sticker on back of screen facing bottom of phone).
[ … ]
11)Reverse engineer.
[ … ]
(Might comment on cleaning of screen and cleaning of connections)
[ … ]
(If keys flat out don't work, new screen connector interface thingy needed)
[ … ]
'''TOOLS REQUIRED: Torx T6, Tweezers'''
How to replace the screen of your Nokia 3300B.
[ … ]
1) Turn phone to back side. Pressing, button on back of phone, gently remove back piece.
[ … ]
2) Using tabs on back side (were behind back piece), release them from their usual spot.
[ … ]
3) Working way around side, left up front piece.("pops" off)
[ … ]
4) Gently pick up and remove keyboard.
[ … ]
5) Using _____ piece, remove screws (see picture) (six screws total) (circle on site)
[ … ]
6) Remove front plate interface from circuitry.
[ … ]
7) Using tweezers, remove metal plate from back. Connector pieces hidden behind shoulder pads.
[ … ]
8) Screen will tend to fall apart, so remove carefully. (keep screen part facing down).
[ … ]
9) Gently turn front piece over, screen will fall out (put hand behind front piece to catch screen)
[ … ]
10) Replace screen with new screen. Make sure oriented properly. (Sticker on back of screen facing bottom of phone).
[ … ]
11)Reverse engineer.
[ … ]
(Might comment on cleaning of screen and cleaning of connections)
[ … ]
(If keys flat out don't work, new screen connector interface thingy needed)
[ … ]
'''TOOLS REQUIRED: Torx T6, Tweezers'''
|