跳转到主内容

跳转至Mac Pro Late 2013 CMOS Battery Replacement简介

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变
Introduction
Use this guide to replace the CMOS battery.
'''Before beginning any work on your Mac Pro:''' Unplug the computer and press and hold the power button for ten seconds to discharge the power supply's capacitors.
'''Be very careful''' not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.
Summary
Replace the CMOS battery in your Mac Pro Late 2013.

工具

  • Spudger x1 removed.
  • TR10 Torx Security Screwdriver x1 removed.
  • TR7 Torx Security Screwdriver x1 removed.
  • Tweezers x1 removed.
  • T5 Torx Screwdriver x1 removed.
  • TR8 Torx Security Screwdriver x1 removed.