跳转到主内容

跳转至Mercedes W123 Vacuum Lock System Diagnosis Technique简介

Nicolas Siemsen编辑

编辑已通过 由 Nicolas Siemsen

已删除
已添加
不变
设备
[ ]Mercedes W123
Type
[ ]technique
Title
[ ]Mercedes W123 Vacuum Lock System Diagnosis Technique
Introduction
The door lock system on a W123 is controlled entirely by vacuum. It is a system made of many parts and can be complicated to diagnose properly if you've never done it before, and especially if the system has been left to deteriorate for some time. [ … ] The first step to fixing the system is to properly diagnose it. Vacuum components, such as door and trunk lock actuators, can be quite expensive so replacing only those that need it will save you time and money over throwing parts at the system in an effort to fix it. [ … ] This guide will walk you through diagnosis of the vacuum door lock system on an early style W123 with the four diaphragm door lock vacuum actuators. However, the technique applies to later models as well; the actuators work the same despite looking different. [ … ] Note - if you find that part of your leak is due to old and cracked diaphragms on your early style door lock vacuum actuators, see the repair guide under the Mercedes W123 repair section to learn how to fix these without replacing the entire assembly.
Time Required Min
1小时
Time Required Max
2小时
Imageid
之前
之后
Difficulty
Moderate
Conclusion
[ ]Upon completion of diagnosis, you can begin repairing or replacing those parts that were found to be leaking.
Author
Public
Summary
[ ]When the door lock system on a W123 develops leaks, it can cause it to work slowly or not at all. Sometimes, the leaks can even cause problems with other vacuum controlled systems on the car. Learn to diagnose what is causing the leaks with this guide.

标志

  • In Progress added.
  • Member-Contributed Guide added.

步骤

Step #: 1
之前
之后
Step #: 2
之前
之后
Step #: 3
之前
之后