跳转到主内容

跳转至How To Apply Stretch Release Battery Adhesive简介

Craig Lloyd编辑

编辑已通过 由 Craig Lloyd

之前
之后
不变
Introduction
Stretch release adhesives are a handy way to reattach batteries! They have pull tabs that, when they work, allow you to effortlessly remove the adhesive. They’re prone to bunching up—if that happens, you’ll have to start fresh with some new strips.
This guide shows how to cut and apply new stretch release adhesive strips when you’re replacing a battery.
'''Note:''' This guide depicts several different phones and batteries during the procedure. Your adhesive application may vary slightly from the photos depicted in this guide, but the method remains the same.
Conclusion
For optimal performance, [https://www.ifixit.com/Wiki/Battery_Calibration|calibrate your newly installed battery|new_window=true] after completing this guide, [[Battery Calibration|calibrate|new_window=true]] your newly installed battery.