跳转到主内容

跳转至Google Pixel 4 Side Buttons Replacement简介

Carsten Frauenheim编辑

编辑已通过 由 Carsten Frauenheim

之前
之后
不变
设备
Google Pixel 4
Type
replacement
Thing
Left Grip Sensor
Title
Google Pixel 4 Left Grip Sensor Replacement
Introduction
Use this guide to replace the left grip sensor and flex cable in your Google Pixel 4.
'''For your safety, discharge your battery below 25% before disassembling your phone.''' This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
'''This procedure will almost always destructively remove the Pixel 4’s grip sensors.''' The sensors are strongly adhered to the phone’s midframe and will usually come out in pieces. Before you begin this procedure, be sure to have replacement parts.
'''Caution:''' Google warns that disassembly of the front laser assembly could result in hazardous exposure to invisible infrared laser emissions. Read their safety warnings [https://support.google.com/pixelphone/answer/9369238?hl=en|here].
Time Required Min
1小时
Time Required Max
3小时
Imageid
之前
之后
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our Answers community for help.
Author
Public
Summary
Guide to replace the left grip sensor flex cable in the Google Pixel 4.

工具

  • SIM Card Eject Tool x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • Tweezers x1 added.
  • Spudger x1 added.
  • T3 Torx Screwdriver x1 added.