跳转到主内容

跳转至Milwaukee M18 2606-20 Circuit Board Replacement简介

Jiseok Kim编辑

编辑已通过 由 Jiseok Kim

之前
之后
不变
Introduction
If you need to replace the circuit board on your drill (replaced the battery but still no power) see this guide on how to remove it. The circuit board is the brain of the drill and controls most components in the drill. Some reasons the circuit board may need replacement are the white light is not turning on or the drill is turning on and the battery has been replaced. Click here for more information on [guide|750|how to solder]