跳转到主内容

跳转至Milwaukee M18 2606-20 Circuit Board Replacement简介

Markus Eldridge编辑

编辑已通过 由 Markus Eldridge

之前
之后
不变
Introduction
* If you need to replace the circuitboard on your drill see this guide on how to remove it. The circuitboard is brain of the drill and controls most components in the drill. In order to remove the circuitboard you will need a Torx T3 screwdriver, a soldering iron, solder, and an opening tool. Click here for more information on [https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750|how to solder]