跳转到主内容

跳转至iPad Pro 10.5" Battery Replacement简介

Dominik Schnabelrauch编辑

编辑已通过 由 Dominik Schnabelrauch

之前
之后
不变
设备
iPad Pro 10.5"
Type
replacement
Thing
Battery
Title
iPad Pro 10.5" Battery Replacement
Introduction
Use this guide to remove and replace the battery for the iPad Pro 10.5”.
Because there are steps in this guide where the battery may remain connected to the logic board, leave the iPad on until the battery is '''completely discharged''' (the iPad turns itself off) before attempting this guide. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
Have plenty of high concentration (over 95%) isopropyl alcohol to help make the removal and residue cleanup easier.
If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
Time Required Min
1小时
Time Required Max
3小时
Imageid
之前
之后
Difficulty
Difficult
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow these instructions in reverse order.'''
'''If possible''', turn on your iPad and '''test your repair''' before resealing the tablet.
For optimal performance, calibrate your newly installed battery after completing this guide: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPad%20Pro%2010.5%22|Answers community] for troubleshooting help.
Author
Public
Summary
How to remove and replace an old, weak, or faulty battery in your iPad Pro 10.5".

指南的前提条件

工具

  • Phillips #00 Screwdriver x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Battery Blocker x1 added.
  • SIM Card Eject Tool x1 added.
  • iOpener x1 added.
  • Tweezers x1 added.
  • Spudger x1 added.
  • Halberd Spudger x1 added.
  • Isopropyl Alcohol x1 added.
  • Nitrile Gloves 100 Box x1 added.
  • Safety Glasses x1 added.
  • iFixit Adhesive Remover (for Battery, Screen, and Glass Adhesive) x1 added.
  • Plastic Cards x1 added.

配件

  • iPad Pro 10.5" Adhesive Strips x1 added.
  • iPad Pro 10.5" Battery x1 added.

步骤

Step #: 1
之前
之后
Step #: 2
之前
之后
Step #: 3
之前
之后
Step #: 4
之前
之后
Step #: 5
之前
之后
Step #: 6
之前
之后
Step #: 7
之前
之后
Step #: 8
之前
之后
Step #: 9
之前
之后
Step #: 10
之前
之后
Step #: 11
之前
之后
Step #: 12
之前
之后
Step #: 13
之前
之后
Step #: 14
之前
之后
Step #: 15
之前
之后
Step #: 16
之前
之后
Step #: 17
之前
之后
Step #: 18
之前
之后
Step #: 19
之前
之后
Step #: 20
之前
之后
Step #: 21
之前
之后
Step #: 22
之前
之后
Step #: 23
之前
之后