跳转到主内容

跳转至HP Pavilion x2 10-n113dx Touch Pad Replacement简介

Justin Ogihara编辑

编辑已通过 由 Justin Ogihara

之前
之后
不变
Introduction
This guide will show how to replace a touch pad in the HP Pavilion x2 10-n113dx. This guide is moderate in difficulty as one must open up the back of the keyboard. It is important to have a heat pad available so that one can reassemble the gray bumper on the back of the keyboard. The replacement guide requires a PH0 PhillipsPhillips #0 screwdriver and a magnetic board is helpful for keeping track of screws.

工具

  • Phillips #0 Screwdriver x1 added.
  • Phillips #000 Screwdriver x1 added.
  • Phillips #00 Screwdriver x1 added.
  • iFixit Opening Tool x1 added.
  • iFixit Opening Tools J0 or 0 or PH0 Phillips head screwdriver J00 JIS Screwdriver Screwdriver J000 Phillips Head Spudger x1 removed.

标志

  • In Progress removed.
  • Student In Progress removed.