跳转到主内容

跳转至HP Pavilion x2 10-n113dx Touch Pad Replacement简介

Cayla Skaggs编辑

编辑已通过 由 Cayla Skaggs

之前
之后
不变
Introduction
This guide will show how to replace a touch pad in the HP Pavilion x2 10-n113dx. This guide is moderate in difficulty as one must open up the back of the keyboard. It is important to have a heat pad available so that one can reassemble the gray bumper on the back of the keyboard. The replacement guide requires a PH0 Phillips screwdriver and a magnetic board is helpful for keeping track of screws.
Time Required Min
20分钟
Time Required Max
20分钟
Summary
How to replace a touch pad in a HP Pavilion x2 10-n113dx.

工具

  • iFixit Opening Tools J0 or 0 or PH0 Phillips head screwdriver J00 JIS Screwdriver Screwdriver J000 Phillips Head Spudger x1 added.
  • Small Plastic Spudger x1 added.
  • Metal Spudger Set x1 added.
  • Heat Pad x1 added.
  • Tweezers x1 added.