跳转到主内容

跳转至G&G GR14 Airsoft Disassembly简介

101 Tech USA编辑

编辑已通过 由 101 Tech USA

已删除
已添加
不变
设备
[ ]GG m14 AEG
Type
[ ]disassembly
Thing
[ ]G&G m-14
Title
[ ]Disassembling G&G m-14
Introduction
The G&G m-14 is actually quit different than the Tokyo Marui m-14 but in many ways that make it MORE compatible with after market parts and upgrades, much easier to disassemble. [ … ] The G&G m-14 takes the same barrels as v2 v3 AEG unlike the marui that requires a unique slotted barrel. The G&G also takes standard v2/v3 gears unlike the marui m-14 that once again take model specific gears. These differences are being stated because there is often times confusion where people are told to purchase m-14 specific gears and barrels when they can just use and stand parts that are normally referred to as "Marui compatible". Basically what I am trying to say is that the G&G m14 is more "Tokyo Marui compatible" as we have come to know it then the actual Marui m-14. It's a good thing!
Time Required Min
没有估计
Time Required Max
没有估计
Imageid
之前
之后
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Summary
[ ]This guide will allow you to disassemble a G&G m-14 down to the gearbox and beyond.

标志

  • In Progress added.
  • Member-Contributed Guide added.

步骤

Step #: 1
之前
之后
Step #: 2
之前
之后
Step #: 3
之前
之后
Step #: 4
之前
之后
Step #: 5
之前
之后
Step #: 6
之前
之后
Step #: 7
之前
之后
Step #: 8
之前
之后
Step #: 9
之前
之后
Step #: 10
之前
之后
Step #: 11
之前
之后
Step #: 12
之前
之后
Step #: 13
之前
之后
Step #: 14
之前
之后
Step #: 15
之前
之后
Step #: 16
之前
之后
Step #: 17
之前
之后
Step #: 18
之前
之后