简介

This guide will go step by step showing you how to get to and replace the power switch on the bottom of your Zoomer Show Pony. You will have to open up the pony's main chassis and disconnect the wires on the pony's motherboard. All of the triangle head screws in this guide are the same size, so no worries about keeping each screw separated.

Flip the pony over.
  • Flip the pony over.

  • Remove the five Triangle 3 screws from underneath.

  • The pony will separate into a few pieces once the screws are removed.

添加评论

Disconnect all of the wires between the head and leg sections.
  • Disconnect all of the wires between the head and leg sections.

  • To replace the power/volume switch, remove the two Phillips #0 screws from the switch.

  • Lift the switch out to replace.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Matthew Sutton

于2018年01月25日注册

269 信誉积分

创作了2篇指南

团队

USF Tampa, Team S20-G5, Passmore Spring 2018 USF Tampa, Team S20-G5, Passmore Spring 2018 的会员

USFT-PASSMORE-S18S20G5

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 11

总计 47