跳转到主内容

Zoomer Jurassic World Indominus Rex Back Cover Replacement

你所需要的

  1. Zoomer Jurassic World Indominus Rex Back Cover Replacement, Back Cover: 步骤 1 中的图像 1,1
    • Turn off and unplug Zoomer Jurassic World Indominus Rex from any power source before doing replacements.

    • Remove all eight (8) 9.3mm Phillips screws using Phillips #1 screwdriver.

  2. Zoomer Jurassic World Indominus Rex Back Cover Replacement: 步骤 2 中的图像 1,2 Zoomer Jurassic World Indominus Rex Back Cover Replacement: 步骤 2 中的图像 2,2
    • Pry apart the back cover of the Jurassic Indominus Rex and the rest of the body using a spudger.

    • Do not take out the back cover immediately as it it still attached to the motherboard by a wire.

  3. Zoomer Jurassic World Indominus Rex Back Cover Replacement: 步骤 3 中的图像 1,2 Zoomer Jurassic World Indominus Rex Back Cover Replacement: 步骤 3 中的图像 2,2
    • Disconnect the orange wire that connects the motherboard and the back cover.

    • Separate the back cover and the rest of the Zoomer Jurassic World Indominus Rex.

    • Gently press the tab on the side of the orange connector if you are having trouble disconnecting the wire.

结论

To reassemble your device, follow these instructions in reverse order.

Anh Le

于01/20/16注册

504 声望

创作了3篇指南

团队

USF Tampa, Team 10-3, Remmell Spring 2016 USF Tampa, Team 10-3, Remmell Spring 2016 的会员

USFT-REMMELL-S16S10G3

4 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 11

总计 391