Zenithink ZTPAD ZT280 C91 Back Panel Replacement

简介

Before you begin this guide, make sure to have the proper tools. You will need a spudger, and a phillips head #00 screwdriver. If you're having trouble with the battery in your device, removing the back panel is one of the first steps in replacing the battery.

你所需要的

步骤 1 Back Panel

Zenithink ZTPAD ZT280 C91 Back Panel Replacement, Back Panel: 步骤 1 中的图像 1，1

Remove the two screws on the bottom using a Phillips #00 screwdriver.
For differentiation purposes, these screws are 4mm long.

编辑

步骤 2

Zenithink ZTPAD ZT280 C91 Back Panel Replacement: 步骤 2 中的图像 3，3

Using a spudger, start prying the case apart by working around the edge slowly.
Be careful not to damage any of the latches that hold the back panel in place, especially if you are using a metal spudger.
While prying, be careful to not lose the power and volume buttons; the case is the only thing holding them in place so they will easily come out once the panel has been removed
Be careful to not damage the speaker cables, they will still be connecting both panels.