Zenbre SoundBank Z3 Bottom Cover Replacement - iFixit 维修指南

简介

This guide is designed to take out a Zebra SoundBank X3 speaker grill and replace it with a new one. Use the Essential Electronics Toolkit, iFixit Opening Tool, and the 64 Bit Driver Kit to perform the repair.

你所需要的

步骤 1 Bottom Cover

Zenbre SoundBank Z3 Bottom Cover Replacement, Bottom Cover: 步骤 1 中的图像 1，2

Zenbre SoundBank Z3 Bottom Cover Replacement, Bottom Cover: 步骤 1 中的图像 2，2

Power off the SoundBank Z3.
Turn over the device.
Peel the silicone feet up to remove.
No extra adhesive is needed to reapply the feet as long as the sticky side is not touched.

步骤 2

Zenbre SoundBank Z3 Bottom Cover Replacement: 步骤 2 中的图像 1，1

Remove all eight of the 11 mm Phillips screws from the bottom of the device.

步骤 3

Zenbre SoundBank Z3 Bottom Cover Replacement: 步骤 3 中的图像 1，2

Zenbre SoundBank Z3 Bottom Cover Replacement: 步骤 3 中的图像 2，2

Remove the bottom panel speaker using an iFixit opening tool.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与9其他贡献者

Cherian Thomas

于03/25/16注册

334 声望

创作了5篇指南

+ 4更多徽章

团队

UMass Dartmouth, Team 3-2, Bhusal Spring 2016 UMass Dartmouth, Team 3-2, Bhusal Spring 2016 的会员

UMASSD-BHUSAL-S16S3G2

5 名成员

创作了8篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 264