跳转到主内容

简介

This guide will assist you in replacing the rear cover of your Zeki TBQG884B tablet, or as a prerequisite for repairs on any of the device's other internal components. It is important to remember before beginning this guide that the device is extremely delicate and to complete each step of this guide very carefully.

配件

没有特定配件。

  1. Zeki TBQG884B Rear Case Replacement, Rear Case: 步骤 1 中的图像 1,2 Zeki TBQG884B Rear Case Replacement, Rear Case: 步骤 1 中的图像 2,2
    • Remove the two screws from the end of the device where the ports are located using a Phillips #1 screwdriver.

  2. Zeki TBQG884B Rear Case Replacement: 步骤 2 中的图像 1,1
    • Place the tablet down so that the screen is facing away from you.

    • Insert the tip of your opening tool into the small gap between the gray and white plastic covering. Pry it open and you should hear the clips opening up.

    • Gently work your way around the perimeter of the tablet's edge.

  3. Zeki TBQG884B Rear Case Replacement: 步骤 3 中的图像 1,2 Zeki TBQG884B Rear Case Replacement: 步骤 3 中的图像 2,2
    • Remove the back cover

    • Remove any tape on the speaker and detach the speaker from the back plate.

    • The speaker is connected to the motherboard by two soldered wires. Don't break them when you remove the speaker.

结论

To reassemble your device, follow these instructions in reverse order.

David Wyman

于2015年09月16日注册

343 声望

创作了3篇指南

团队

IUPUI, Team 1-3, Harley Fall 2015 IUPUI, Team 1-3, Harley Fall 2015 的会员

IUPUI-HARLEY-F15S1G3

5 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 7

过去 30 天: 19

总计 319