跳转到主内容

简介

This guide will show you how to remove a defective or broken power button on your ZTE ZMAX smart phone.

  1. ZTE ZMAX Z970 Power Button Replacement, Battery: 步骤 1 中的图像 1,2 ZTE ZMAX Z970 Power Button Replacement, Battery: 步骤 1 中的图像 2,2
    • Insert a fine point tool into the hole on the top left side of the phone to remove the SIM and SD card trays.

    • Pull out the trays.

  2. ZTE ZMAX Z970 Power Button Replacement: 步骤 2 中的图像 1,2 ZTE ZMAX Z970 Power Button Replacement: 步骤 2 中的图像 2,2
    • Insert a plastic opening tool into the groove between the phone’s back cover and casing.

    • Move the plastic opening tool along the edges of the phone to unclip the two pieces.

  3. ZTE ZMAX Z970 Power Button Replacement: 步骤 3 中的图像 1,3 ZTE ZMAX Z970 Power Button Replacement: 步骤 3 中的图像 2,3 ZTE ZMAX Z970 Power Button Replacement: 步骤 3 中的图像 3,3
    • Remove the ten 1.2mm screws with a Phillips #000 screwdriver.

  4. ZTE ZMAX Z970 Power Button Replacement: 步骤 4 中的图像 1,2 ZTE ZMAX Z970 Power Button Replacement: 步骤 4 中的图像 2,2
    • Remove the mid frame with the plastic opening tool.

  5. ZTE ZMAX Z970 Power Button Replacement: 步骤 5 中的图像 1,2 ZTE ZMAX Z970 Power Button Replacement: 步骤 5 中的图像 2,2
    • Disconnect the battery from the motherboard.

  6. ZTE ZMAX Z970 Power Button Replacement: 步骤 6 中的图像 1,2 ZTE ZMAX Z970 Power Button Replacement: 步骤 6 中的图像 2,2
    • Wedge a spudger underneath the battery and gently pry upwards to remove the battery.

    • Once free from the glue, remove from device.

    • The glue holding down the battery is strong so work slow and cautiously to avoid starting a fire.

  7. ZTE ZMAX Z970 Power Button Replacement, Power Button: 步骤 7 中的图像 1,3 ZTE ZMAX Z970 Power Button Replacement, Power Button: 步骤 7 中的图像 2,3 ZTE ZMAX Z970 Power Button Replacement, Power Button: 步骤 7 中的图像 3,3
    • Remove the black tape covering the motherboard.

    • Remove the single 1.2mm screw with a Phillips #000 screwdriver.

  8. ZTE ZMAX Z970 Power Button Replacement: 步骤 8 中的图像 1,3 ZTE ZMAX Z970 Power Button Replacement: 步骤 8 中的图像 2,3 ZTE ZMAX Z970 Power Button Replacement: 步骤 8 中的图像 3,3
    • Use the flat end of the spudger to release the upper left and right prongs that secure the motherboard.

    • Detach the antenna cable.

  9. ZTE ZMAX Z970 Power Button Replacement: 步骤 9 中的图像 1,3 ZTE ZMAX Z970 Power Button Replacement: 步骤 9 中的图像 2,3 ZTE ZMAX Z970 Power Button Replacement: 步骤 9 中的图像 3,3
    • Lift up the tan flap on the three ZIF connectors.

    • Pull the ribbon out of the now unlocked ZIF connectors.

  10. ZTE ZMAX Z970 Power Button Replacement: 步骤 10 中的图像 1,2 ZTE ZMAX Z970 Power Button Replacement: 步骤 10 中的图像 2,2
    • Lift the covering panel below the motherboard covering and connecting the power button.

    • Disconnect the circuit tape of the power button and remove the power button.

    • The power button in these photos has been damaged and not soldered to the motherboard.

    • The new power button will have to be desoldered to the mother board.

结论

To reassemble your device, follow these instructions in reverse order.

Burak Cengiz

于2018年02月15日注册

480 声望分

创作了4篇指南

团队

USF Tampa, Team S17-G3, Boczar Spring 2018 USF Tampa, Team S17-G3, Boczar Spring 2018 的会员

USFT-BOCZAR-S18S17G3

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 445