修复你的物品 社区 商店

ZTE Blade Spark Rear-Facing Camera

简介

Follow this guide to disassemble the ZTE Blade Spark device and replace the rear-facing camera.

  1. ZTE Blade Spark Rear-Facing Camera, ZTE Blade Spark Rear-Facing Camera: 步骤 1 中的图像 1，1

    • First, apply heat evenly on the back cover using a heat sack to soften the adhesive.

    编辑

  2. ZTE Blade Spark Rear-Facing Camera: 步骤 2 中的图像 1，1

    • Now, carefully remove the back cover.

    编辑

  3. ZTE Blade Spark Rear-Facing Camera: 步骤 3 中的图像 1，1

    • Once opened, Locate and remove all exposed screws using a Phillips-Head screwdriver and set them aside.

    编辑

  4. ZTE Blade Spark Rear-Facing Camera: 步骤 4 中的图像 1，1

    • To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.

    编辑

  6. ZTE Blade Spark Rear-Facing Camera: 步骤 5 中的图像 1，1

    • After removing the white plastic panel, you should see a black metal battery cover.

    • To remove the metal battery cover, remove the screws from the panel using a Phillips screwdriver if you have not yet done so.

    编辑

  7. ZTE Blade Spark Rear-Facing Camera: 步骤 6 中的图像 1，1

    • Then, simple lift to remove the metal battery cover.

    编辑

  8. ZTE Blade Spark Rear-Facing Camera: 步骤 7 中的图像 1，1

    • You have reached the Fingerprint Scanner, the device Battery, and Front Facing Camera.

    编辑

  9. ZTE Blade Spark Rear-Facing Camera: 步骤 8 中的图像 1，3 ZTE Blade Spark Rear-Facing Camera: 步骤 8 中的图像 2，3 ZTE Blade Spark Rear-Facing Camera: 步骤 8 中的图像 3，3

    • Proceeding with disassembly, next up is the top chipset which the Rear Facing Camera is attached to.

    • To detach the chipset and reach the Rear Camera, locate and disconnect five power connectors surrounding the top chipset (as shown in images).

    编辑

  10. ZTE Blade Spark Rear-Facing Camera: 步骤 9 中的图像 1，1

    • Once you have the power connectors disconnected from the top chipset, use a Phillips screwdriver to remove the final screw located at the very top of the chipset (as shown in image).

    编辑

  11. ZTE Blade Spark Rear-Facing Camera: 步骤 10 中的图像 1，1

    • Then, simply lift chipset from top and detach from the device frame.

    编辑

  12. ZTE Blade Spark Rear-Facing Camera: 步骤 11 中的图像 1，1

    • You have now reached the final replacement component of the device, the Rear Facing Camera!

    • For step-by-step instructions on replacing any of the device components covered throughout the disassembly process, check out our ZTE Blade Spark Replacement guides.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

Hung Vu

于01/24/18注册

632 声望

撰写一个指南

徽章: 7

+ 4更多徽章

团队

Gateway, Team S1-G6, Johnson Spring 2018 Gateway, Team S1-G6, Johnson Spring 2018 的会员

GCC-JOHNSON-S18S1G6

2 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 2

过去 30 天： 17

总计 2,246