简介

This guide instructs you to replace the LED lights on your Yuneec Typhoon H drone. The LED lights are important for tracking where your drone is, when flying within line of sight and for other pilots to know where your drone is in the sky.

配件

无需配件。

  1. This guide begins with the propeller already removed.
    • This guide begins with the propeller already removed.

    添加评论

  2. Turn the drone upside down to have easy access to the prop arm.
    • Turn the drone upside down to have easy access to the prop arm.

    • Twist out the prop motor clockwise.

    添加评论

    • Unscrew two 4.9mm screws on the board using a Phillips #000 screwdriver.

    添加评论

    • Hold the LED board in one hand and pinch the plug at the connection to the board with the other hand.

    • Pull the plug out from the connection piece.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Claire Luce

于2018年04月16日注册

347 信誉积分

创作了2篇指南

团队

Cal Poly, Team S22-G3, Maness Spring 2018 Cal Poly, Team S22-G3, Maness Spring 2018 的会员

CPSU-MANESS-S18S22G3

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 5

过去的30天: 12

总计 89