修复你的物品 社区 商店

Yuneec Typhoon H Gimbal Bushing Reattachment

简介

This guide will demonstrate how to put the camera apparatus back together on a Yuneec Typhoon H, if it has come apart.

你所需要的

  1. Yuneec Typhoon H Gimbal Bushing Reattachment, Gimbal Bushing Connectors to Camera Mount: 步骤 1 中的图像 1，2 Yuneec Typhoon H Gimbal Bushing Reattachment, Gimbal Bushing Connectors to Camera Mount: 步骤 1 中的图像 2，2

    • In order to repair the camera and camera gimbal, remove the camera configuration from the body of the drone.

    • Pull up on the tab connected to the camera configuration and slide the entire apparatus off.

    编辑

  3. Yuneec Typhoon H Gimbal Bushing Reattachment: 步骤 2 中的图像 1，3 Yuneec Typhoon H Gimbal Bushing Reattachment: 步骤 2 中的图像 2，3 Yuneec Typhoon H Gimbal Bushing Reattachment: 步骤 2 中的图像 3，3

    • Put the gimbal bushings (the rubber balls) back into the plastic alignment mounts.

    • The circle that is separated from the main body of the bushing should then be inserted into the hole.

    • When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.

    编辑
结论

To reassemble your device, simply slide the camera mount back onto the bottom of the drone.

2等其他人完成本指南。

作者

与6其他贡献者

Jake Breul

于04/16/18注册

127 声望

撰写一个指南

徽章: 5

+ 2更多徽章

团队

Cal Poly, Team S22-G3, Maness Spring 2018 Cal Poly, Team S22-G3, Maness Spring 2018 的会员

CPSU-MANESS-S18S22G3

4 名成员

创作了5篇指南

3条评论

Camera not getting power after crash.

Don - 回复

Crashed drone and camera not getting power anymore. Nothing appears to be broken.

Don - 回复

Did steps. Bushings ok. Camera still won't communicate.

vickiesamus - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 5

总计 1,605