修复你的物品 社区 商店

Yuneec ST10 Plus Battery Replacement

简介

If you own a Yuneec ST10 Plus, there is a chance your battery will stop holding its charging capacity over time. The main causes of this issue are battery overheating, and the end of your battery charge/discharge cycles. Follow this step-by-step guide on how to replace your battery. No tools required and a quick replacement.

  1. Yuneec ST10 Plus Battery Replacement, Battery: 步骤 1 中的图像 1，1

    • Flip the controller upside down to access the battery compartment.

    • Grab the compartment door and pull down.

    编辑

  3. Yuneec ST10 Plus Battery Replacement: 步骤 2 中的图像 1，1

    • Gently lift the blue tab connected to the battery in order to remove the battery from its housing.

    编辑

  4. Yuneec ST10 Plus Battery Replacement: 步骤 3 中的图像 1，3 Yuneec ST10 Plus Battery Replacement: 步骤 3 中的图像 2，3 Yuneec ST10 Plus Battery Replacement: 步骤 3 中的图像 3，3

    • To disconnect the battery from the remote, grab the red and black connectors.

    • Pull gently on connectors until they disconnect.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 143