跳转到主内容

简介

Use this guide to replace the Yamaha NS-AW190BL rear casing.

配件

没有特定配件。

  1. Remove the six Phillips Head 1.2mm screws on the front side of the speaker. Remove the six Phillips Head 1.2mm screws on the front side of the speaker.
    • Remove the six Phillips Head 1.2mm screws on the front side of the speaker.

  2. Crack open both parts of the casing carefully. Using a plastic opening tool, wedge open the bottom of the speaker to separate the two parts of the speaker. Using a plastic opening tool, wedge open the bottom of the speaker to separate the two parts of the speaker.
    • Crack open both parts of the casing carefully.

    • Using a plastic opening tool, wedge open the bottom of the speaker to separate the two parts of the speaker.

  3. Remove the cooling foam. Use a metal spudger to push the tab in on the red wire. Repeat the process for the blue wire.
    • Remove the cooling foam.

    • Use a metal spudger to push the tab in on the red wire.

    • Repeat the process for the blue wire.

  4. The blue wire can now be removed from its connector. Remove the red wire to free the rear casing.
    • The blue wire can now be removed from its connector.

    • Remove the red wire to free the rear casing.

结论

To reassemble your device, follow these instructions in reverse order.

Nick Ruiz

于2017年02月07日注册

331 信誉积分

创作了3篇指南

团队

USF Tampa, Team 17-3, Blackwell Spring 2017 USF Tampa, Team 17-3, Blackwell Spring 2017 的会员

USFT-BLACKWELL-S17S17G3

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 9

总计 627