修复你的物品 社区 商店

Yamaha APX-6N Guitar Strings Replacement

简介

This guide will teach you how to remove old or damaged strings from a Yamaha APX-6N guitar. It will also teach you how to put the new strings on properly and tie knots at the bridge and head so the strings stay in place.

你所需要的

  1. Yamaha APX-6N Guitar Strings Replacement, Guitar strings: 步骤 1 中的图像 1，1

    • Loosen the guitar strings by turning the tuning pegs counter clockwise.

    编辑

  2. Yamaha APX-6N Guitar Strings Replacement: 步骤 2 中的图像 1，1

    • To avoid injury, assure strings are loosened before cutting.

    • Once the strings are loose, cut them using the wire cutters.

    • After strings have been cut, remove them by pulling them out of the tuners and the bottom of the bridge.

    编辑

  3. Yamaha APX-6N Guitar Strings Replacement: 步骤 3 中的图像 1，2 Yamaha APX-6N Guitar Strings Replacement: 步骤 3 中的图像 2，2

    • Insert the end of the string through the middle of the bridge until four inches comes through.

    • Wrap the short end of the string around the long end, making a loop.

    • Put the short end of the string through the loop around three to four times.

    • Pull both ends of the string until the knot is tight.

    编辑

  5. Yamaha APX-6N Guitar Strings Replacement: 步骤 4 中的图像 1，2 Yamaha APX-6N Guitar Strings Replacement: 步骤 4 中的图像 2，2

    • Insert the end of the string into the hole on the correct tuning peg.

    • Pull the end over the tuning peg and loop under the string. Then push the end of the string under the loop.

    • Put the end of the string through the loop and pull both ends until the knot is tight.

    编辑

  6. Yamaha APX-6N Guitar Strings Replacement: 步骤 5 中的图像 1，2 Yamaha APX-6N Guitar Strings Replacement: 步骤 5 中的图像 2，2

    • Repeat Step 4 for all other strings. Strings should be placed in the tuning pegs in clockwise order. Refer to string packaging for more details.

    编辑

  7. Yamaha APX-6N Guitar Strings Replacement: 步骤 6 中的图像 1，1

    • Turn the tuning pegs clockwise to tighten each string until the string makes a sound when plucked.

    • Do not overtighten the strings! Strings may snap and lead to injury.

    编辑

  8. Yamaha APX-6N Guitar Strings Replacement: 步骤 7 中的图像 1，1

    • After all strings have been replaced, tune the guitar to your desired tuning.

    • Check the headstock and the bridge for any loose string ends.

    • If necessary, use the wire cutters to snip off excess string.

    • The ends of the strings are very sharp.

    编辑
结论

You now have new strings for your guitar!

作者

与3其他贡献者

Benjamin

于05/10/21注册

145 声望

撰写一个指南

徽章: 2

团队

York University, Team S1-G20, O'Regan Summer 2021 York University, Team S1-G20, O'Regan Summer 2021 的会员

YORK-O'REGAN-SU21S1G20

1 名成员

创作了1篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 6

总计 270