跳转到主内容

XtremeMac Luna Dissasembly

你所需要的

  1. XtremeMac Luna Dissasembly, Bottom Panel: 步骤 1 中的图像 1,3 XtremeMac Luna Dissasembly, Bottom Panel: 步骤 1 中的图像 2,3 XtremeMac Luna Dissasembly, Bottom Panel: 步骤 1 中的图像 3,3
    • Flip the device over so that the batteries are closest to you.

    • Remove the battery lid by pressing the battery cover's tab and pulling it away from the device.

    • Push the battery against the spring and lift it out of the casing.

    • Repeat with the other battery.

  2. XtremeMac Luna Dissasembly: 步骤 2 中的图像 1,1
    • Unscrew all eight 12mm Phillips head screws with a Philips #1 screwdriver.

    • The iFixit 26 bit screwdriver kit will not reach the screws. Make sure to use a screwdriver that is thin enough to not get stuck in the screw holes.

  3. XtremeMac Luna Dissasembly: 步骤 3 中的图像 1,2 XtremeMac Luna Dissasembly: 步骤 3 中的图像 2,2
    • Flip the Luna back over so that the buttons are facing upward and the LCD screen is facing you.

    • Gently tilt the lid back 45 degrees so that the inside is exposed.

    • Be mindful of the wires inside of the Luna. It is easy to break a connection if a wire gets caught.

结论

To reassemble your device, follow these instructions in reverse order.

Daniel Johnson

于04/14/13注册

1 声望

撰写一个指南

团队

Cal Poly, Team 3-47, Amido Spring 2013 Cal Poly, Team 3-47, Amido Spring 2013 的会员

CPSU-AMIDO-S13S3G47

4 名成员

创作了8篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 409