跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Use this guide to remove the PCB circuit board in your Xiaomi Redmi 2 for repair or replacement.

  1. Use the flat end of the spudger to remove the back panel from the mid-frame and front body. Use the flat end of the spudger to remove the back panel from the mid-frame and front body.
    • Use the flat end of the spudger to remove the back panel from the mid-frame and front body.

  2. Insert your finger into the curved opening of the mid-frame.
    • Insert your finger into the curved opening of the mid-frame.

    • Lift the battery and remove.

  3. Remove the SIM and/or memory cards if present.
    • Remove the SIM and/or memory cards if present.

    • Remove twelve 3.4 mm Phillips #000 screws securing the mid-frame to the front body.

  4. Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.
    • Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.

  5. Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.
    • Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.

    • Keep this screw separate from the initial twelve.

  6. Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector. Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.
    • Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.

  7. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  8. Using one prong of the tweezers, pry the ribbon clip away from the motherboard. Using one prong of the tweezers, pry the ribbon clip away from the motherboard.
    • Using one prong of the tweezers, pry the ribbon clip away from the motherboard.

  9. Lift and  hinge the motherboard with your fingers. Lift and  hinge the motherboard with your fingers.
    • Lift and hinge the motherboard with your fingers.

  10. Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector. Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.
    • Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.

  11. Using the tweezers, pull the antenna connector from the motherboard. Using the tweezers, pull the antenna connector from the motherboard.
    • Using the tweezers, pull the antenna connector from the motherboard.

  12. Lift the motherboard out of the front cover and set aside.
    • Lift the motherboard out of the front cover and set aside.

  13. Remove the 2.9 mm Phillips #000 screw that holds the PCB circuit board to the screen assembly.
    • Remove the 2.9 mm Phillips #000 screw that holds the PCB circuit board to the screen assembly.

  14. Using the tweezers, lift the antenna connector from the PCB circuit board.
    • Using the tweezers, lift the antenna connector from the PCB circuit board.

  15. Do not remove the PCB circuit board at this time. Using the nylon or metal spudger, gently pry back the top of the PCB circuit board from the screen assembly.
    • Do not remove the PCB circuit board at this time.

    • Using the nylon or metal spudger, gently pry back the top of the PCB circuit board from the screen assembly.

  16. Using the nylon or metal spudger, pry back the silver clip covering the ribbon connector.
    • Using the nylon or metal spudger, pry back the silver clip covering the ribbon connector.

  17. Carefully lift the PCB circuit board from the screen assembly and set aside. The screen assembly is pictured to the left of the circuit board and is now ready for repair or replacement.
    • Carefully lift the PCB circuit board from the screen assembly and set aside.

    • The screen assembly is pictured to the left of the circuit board and is now ready for repair or replacement.

结论

To reassemble your device, follow these instructions in reverse order.

14等其他人完成本指南。

Alicia Brenner

于2015年10月01日注册

3,413 信誉积分

创作了5篇指南

团队

USF Tampa, Team 1-3, Leahy Fall 2015 USF Tampa, Team 1-3, Leahy Fall 2015 的会员

USFT-LEAHY-F15S1G3

2 名成员

创作了5篇指南

my phone is head phone signal

Momo Bachaspatimayum - 回复

Battery terminal shouting help

Adil - 回复

I want purches PCB Circuit not available in Akola service center

narendra thokal - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 14

过去的30天: 42

总计 19,778